Wednesday, November 27, 2019

buy custom McCarthy Construction Company essay

buy custom McCarthy Construction Company essay One of the Companies that are not currently in my country is McCarthy Construction Company. McCarthy is a Construction Company that was founded in 1864 in the United States of America and is therefore one of the nations largest provider of construction services. It first started by building farmhouses. The Company is a pivotal partner that is involved in the building and construction of the countrys civil and industrial infrastructure. The companys portfolio is further marked with the construction of railways, key roads, dams and ports. The Company has been listed as one the leading construction Company in United States. If the company was to enter into my country with a view of taking construction contracts, then it is vital for it to change its business model in order to succeed in its business. With the globalization of markets as well as production, it is essential for the company to evaluate its international strategy when entering new markets through the use of various options. In order to compete on the global arena, the company will have to change its business model through employing and implementing the 3As strategy in order to succeed. This refers to Adaptation, aggregation and Arbitrage. The use of Adaptation by McCarthy Construction Company when entering a new market in my country will be aimed at boosting the companys market share and revenues through maximization of the companys local revenue. Adaptation will also enable the company to adapt towards the different cultures of the societies that it has established in their operations making it easier for it to make sales locally. This will be done through the creation of local units responsible for handling the supply chain in each of the national market. In addition, McCarthy Construction Company, as it seeks to enter into a new market in our country will have to use aggregation as a strategy for its expansion. This will ensure that the Company make attempts at delivering economies of scale through c reation of either regional or global operations which will involve standardization of services or products grouping and offering together with the production and development process. McCarthy Construction Company will have to make the necessary changes in its business model when entering the new country and market through application of arbitrage. This will involve the exploitation of existing differences between regional or national markets through the location of separate parts in the supply chain that is prevalent in different places. McCarthy Construction Company will therefore be obliged to choose one or more of the 3 major strategic options of Aggregation, Adaptation and Arbitrage because they are associated with different types of organizations. However, McCarthy Construction, as a company must place major emphasis on Arbitrage because being functional and vertical, it will put explicit attention towards the balancing of demand and supply across and within organizational boundaries. Business leaders in the company should therefore figure out the elements which will meet McCarthy Construction Companys needs and accordingly prioritize them (Ogbor, 2009). In conclusion, the entering of McCarthy Construction Company in my country and the subsequent changes that will be made by the company on its business model will either break it or make it to succeed. If the changes made to the companys business model are carried out positively, it is definite that the company will succeed in its business endeavors in the country. However, if such changes on the companys business model are not done carefully, then it is obvious that it will be difficult for the company to succeed in my home nation. In order to succeed, the company should therefore ensure that the new elements meant to change its business model become good organizational fits and focus is placed on either one or two of the three As. The McCarthy Construction Companys Business Model should therefore be done carefully and strategically with a view of enabling the companies succeed in its business career in the new country. First Solars Multinational Business Context (Technology, Competition, Markets e.t.c) and its internal resources First Solar was founded as a glass company by Harold McMaster who was a glass genius. The company is known for changing the way through which the world is powered through creation of sustainable solutions of solar energy. Technology The current photovoltaic industry was categorized into two technological camps namely: those that believed in the achievement of lower costs through the application of high efficient but high costs cells and those that believed in low cost, moderately efficient solar aimed at reaching these goals. First Solar therefore made use of much cheaper glass commodities to back its cells instead of making use of high-cost c-Si that was ultra pure. Only a small amount of expensive semiconductor material which was light-converting was used to coat the cells. First Solars Market Strategy First Solar, during ts first decade of operation depended on markets having large current subsidies in order to sell its modules. Subsidies were the only channel of encouraging investment in technology because solar had not yet been cost competitive with generational conventions. Shifting towards sustainable markets that supported the demand of PV solar with economic fundamentals and transition became the long term plan for First Solar as a company. Experience curve learnings were provided through subsidy markets which allowed the company to increase their competitiveness in relation to conventional generation. Scaling up enabled the companys cost to drop fast (Winslow, 2011). First Solar Started talking openly about its intentions of pursuing sustainable markets and transition in 2009. For the company, transition markets are those with a light subsidy like for instance the ITC in the United States together with favorable conditions for generation of solar. These transition markets resulted in high cost applications and competition in PV solar costs having peak loads. On the other hand, sustainable markets regard those ones which needed no subsidy and whose conditions are favorable enough to manufacture PV solar costs at competitive prices and conventional generation. The application of this strategy by First Solar was different with that of its competitors who sought their expansion by growing within the existing subsidy markets. First Solar was therefore capable of accessing markets with the lower price points as compared to its competitors because of its superior cost position in the industry. First Solar attained a sustainable competitive advantage over its rivals because of the downstream integration. The company was able to maintain profitability even though the United States Solar market matured to the extent that the company could no longer find it necessary for it to participate in EPC and development to drive the volume growth. The use of the integrated model by First Solar abolished conflicts as well as helped the company achieve all its benefits. How First Solar should use home base, portfolio, hub, platform, and/or mandate approaches as options for its multinational business structure in the next decade First Solar should use a Homebase approach in its multinational business structure by establishing a base of its major operations or headquarter to enable it coordinate its business from both local and international chains. This will enable the company be better placed in addressing the challenges facing its branches in various parts of the world. The creation of a home base will serve as an office or administrative centre for the company. First Solar should also use portfolio management to make decisions regarding policy and investment mix, match its investments to objectives, asset allocation for institutions and individuals and to balance risk against the companys performance. The company should therefore use portfolio management to ascertain its weaknesses, strengths, threats and opportunities in order to maximize returns. In order to establish a good multinational business structure, First Solar should establish a hub, or a city in which its major operations or facilities should be housed so that the companys operations are efficient. The company should also use relevant platforms like facebook, Google, Windows Mobile, twitter and other social networking to market its products. This will help the company to manage and deploy its range of products in a competitive manner. Platform strategies will also enable the company to achieve generation and innovation of new revenue growth through leveraging of existing modules, brands and sub-system technologies. Anatina Toyss Value Chain and Key Competencies Since the year 1949, the Anatina Toys is known to have manufactured close to 400 billion tiny tyres, plastic bricks and inter-compatible play pieces making it to become the fifth largest toy maker in the world. In 1992, the group was able to achieve remarkable success by attaining or capturing 80% of the United States toy market. However, from the year 2001 to 2004, the group underwent significant financial difficulties because of internal problems and adverse industry changes. As a result, the group has launched a turn around strategy aimed at the establishment of a profitable core platform to prepare the Group for growth. Further, the company aims at using the best offshoring or outsourcing in order to increase the company profits (Ireland, et al, 2008). Despite the fact that ANATINA TOYS brand is a unique resource in the Group, the Groups former portfolio which was horizontally integrated did not become the best alternative strategy of leveraging the Groups name. Key themes are run known to run through the Anatina Toyss changes to its value chain. This is through changes in the Companys Sales, Marketing and Product Generation. The Company refocused on its brink products in order to differentiate itself from its rivals with lower quality. Through making relevant changes in manufacturing and distribution, the Company was able to drive its costs down in order to move closer to the Groups effiiciency frontier. Anatina Toys has been successful in pushing for Willingness to Pay Volume and Cost through refocusing on the companys core competency of marketing and developing creative products while cooperating simultaneously with its partners across the companys Value Chain. In order to augment the companys position in the industry as a premium toy brand, Anatina Toys has established a long term operating margin for Manufacture, Distribution, product generation and generation sourcing. Good performance was sustained in LEGOs single product through building the companys value chain and thus greatly enabled it to succeed. The Anatina Toys, having a production of about 24 billion annually, rationalized sourcing using economies of scale together with the opportunity of drastically reducing production complexity through targeting large sub-contractors. A decision was made that Production was to be outsourced to various partners. For instance, most of the products were outsourced predominantly to Flextronics. Flextronics, which was a leading multinational company dealing in electronic manufacturing services and based in Singapore became Anatina Toyss biggest partner in production that was undertaken. The outsourcing and offshoring services offered by Flextronics did not satisfy or meet the needs of Anatina Toys and thus the company withdrew from the deal. However, at the end, ANATINA TOYS was not satisfied with the effectiveness offered by Flextronics in the facilities that were outsourced. It was learnt by the company that even though outsourcing looked liked the best solution towards their problems, it was later ascertained that this was not to be. LEGOs production Value Chain is based on the Development function, Molding, Development of Molding Machines, Pre-pack, assembling, Post-pack and distribution. Given the three stages of Anatina Toys Outsourcing or offshoring, there is need for the company to adopt the best outsourcing/off shoring functions that will enable the company to achieve maximum profits. The challenges encountered in the Pre-Flextronics, during Flextronics and in the Post-Flextronics eras should serve as a lesson for the Anatina Toys to select the best outsourcing/offshoring functions of the value chain. This will ensure that Anatina Toys achieves its business targets and increases its profitability. For a start, the company should back source the plants that were operated by its Strategic partner-Flextronics and maintain its relationships with a small number of its smaller external suppliers. This will enable faster and easier distribution of its products towards the intended markets thus increasing the companys productivity. However, the company should be ready to overcome some of the challenges that may arise as a result of adapting the new methods of outsourcing. Among some of the possible challenges that may arise includes optimization and stabilization of operations during the various stages of transition. The company should also be capable of predominantly balancing the internal supply capacity with the Groups market demands. Overcoming such challenges will make it possible for the company to get the best partners for offshoring or outsourcing its products and services. Anatina Toys should apply the district forms of global strategy of the three As of Adaptation, Aggregation and Arbitrage in order to succeed in its business activities. By maximizing the Groups local relevance, the companys market share and revenue will be greatly boosted. This can be achieved through creating of local units or branches in each of the companys national market to carry out the task of supplying. This strategy should be used by the company as it starts its new expansion strategies beyond their markets based in home. In order to achieve economies of scale and therefore ensure that the best outsourcing channel is selected, attempts should be made to achieve economies of scale through aggregation. This will involve the standardization of Anatina Toyss service or product offering together with the production and development process. In addition, Anatina Toys should also exploit the differences between its regional and national markets when selecting the best methods of out sourcing or offshoring. This will involve the location of various parts of the supply chain located in different places of the Groups operations. Through the use of the AAA triangle, Anatina Toys will be having a clear strategy for its managers and thus be better placed in choosing the best strategies for outsourcing or offshoring. The percentage of sales that is spent on the companys advertising costs will be an indication of the importance of adaptation for the company while the percentage that is incurred in R D will serve as a proxy for the importance that aggregation has on the Anatina Toys. The importance of arbitrage is gauged through the percentage that is spent on labor. The Anatina Toys should therefore strive at achieving best production and distribution standards and select best outsourcing and offshoring partners which will ensure that the company is driven towards greater heights. Buy custom McCarthy Construction Company essay

Saturday, November 23, 2019

How to Use Mood and Atmosphere in Your Novel - Freewrite Store

How to Use Mood and Atmosphere in Your Novel - Freewrite Store ï » ¿The mood, or atmosphere, of your novel, is one of the things that makes your story stick in your readers’ minds long after they’ve turned the last page. Think about some of your favorite novels - what is it that you remember most? For me, the stormy atmosphere of my favorite novel, Wuthering Heights, is the first thing that comes to mind. Emily Bronte managed to create a mood in the novel that I really related to during my turbulent teenage years. As I’m writing this, I’m listening to the angry crashing of thunder and the pouring torrential rain, listening to children screaming as they run inside - what a perfect reminder of how nature creates atmosphere without any effort at all! The Power of Your Setting for Atmosphere There’s a variety of factors that go into creating mood and atmosphere in fiction. Your setting - including details like the weather and climate - can be a great starting point for conveying a mood. In Wuthering Heights, for example, the windswept moors of the Yorkshire Dales created the perfect backdrop for the atmosphere of the story. It’s the setting that allows you to introduce details that create the mood. The kinds of details that you can use for conveying the atmosphere against the backdrop of your story include smells, sounds, and sights. For example, you could create a gothic mood by using details that describe the decay of an abandoned house - cobwebs in the corners, rust on the bars on the windows, clouds of dust, and so on. Using Mood Words As a beginning writer, when I first came across the term ‘mood words’, I thought it referred to a list of moods (e.g. happy, depressed, angry, despondent, etc.). I was wrong. Mood words are broadly defined as descriptive verbs and adjectives that add an extra dimension to non-descript actions. For example, consider the difference between these sentences: Adelaide walked towards the door. Adelaide tiptoed towards the door. Walking is non-descript. We all do it, and without any kind of descriptors about howa character is walking, there’s no sense of mood or atmosphere. To tiptoe, however, is to walk in a particular way - to avoid being heard or to avoid disturbing someone. Overall, tiptoeing creates a sense of stealth and can be used to convey an atmosphere of tension or caution. Mood words are incredibly useful when you’re trying to convey an atmosphere. It can be helpful to have a list of mood words for particular types of scenes that you can easily refer back to. Here’s an example to get you started: Eerie Mood Words: Creaking Rattling Thumping Scuttling (as in a mouse scuttling) Whistling (as in the wind whistling) Cracking (as in a twig cracking) Show, Don’t Tell The easiest way to create a mood is to tell the reader what the mood is, right? Wrong. Which of these two passages is more engaging and captivating in its description of mood?: Rebecca felt happy that the interview had gone well. She was excited to hear back from the manager. Rebecca walked sedately out of the building, but as soon as she was out of sight of the reception desk, she almost danced across the road to where Dom was waiting for her. A bubbling laugh escaped her lips as she ran to him and threw her arms around his neck. â€Å"I think I’ve got it!† she almost shouted. â€Å"Oh, Dom, you should’ve seen me in there!† You should always avoid telling your readers something when you can show them through your characters actions and speech. The second passage conveys the excitement in a way that makes the reader feel part of the scene - simply telling the reader that your character is excited isn’t going to create an atmosphere of excitement. Word Choices The words that you use to describe a scene or setting can have a powerful impact on the kind of mood you create. When I was studying for my Creative Writing degree, my tutor set an assignment that I thought I’d suck at, but I actually found that I enjoyed it. We were given a setting - a simple backyard - but told to describe it in three different ways, conveying a different atmosphere each time. This is how it turned out: Scene 1: Shadows played across the yard like a shroud. Long grass, unkempt and almost knee-high, danced in the breeze. A child’s bicycle, long abandoned, lay in the shadow of a withered oak tree. Sunlight blazing off the sash windows of the house made it impossible for Derrick to see whether Susan was inside. Scene 2 Alstroemeria bloomed in the bright-blue planter pressed up against the side of the front porch. Danny’s bike was, yet again, abandoned in the middle of the lawn at the foot of the old oak. Excited giggles drifted down from the treehouse as the boys quickly hauled the ladder up. â€Å"Is your Mom home?† Derrick called out to the boys, shading his eyes against the glare of the sun. Scene 3 There were some signs that this had once been a happy home - the rusty bicycle below the oak tree, and the partially-collapsed remains of a treehouse. There had once been a lawn, but now it was just a scorched black scar in front of the dilapidated house. Derrick dug the toe of his boot into the dirt and sighed. It had been fifteen years, but if he breathed in deeply enough, it was almost as if he could still smell the smoke of the fire. The words that you choose to describe anything in your novel have the power to convey very different moods. You have to be careful about the vocabulary that you choose, to ensure that every word matches up with the mood you’re wanting to portray. Descriptions are a lot like paintings. The details that you show to your reader come together to create an overall picture - and if you use details that don’t fit the mood, they’ll be jarring to your readers. Putting What You’ve Learned Into Practice Actually practicing using mood and atmosphere in your novel is the best way to get better at it. I’ve put together some exercises to help you get started. Imagine you’re writing a ghost story. Which of these two settings would provide the best backdrop for your story?: A cabin on the beach on the island of Barbados in summer An isolated cabin in a remote part of the Scottish highlands in winter (where there are only a few hours of daylight each day) Imagine you’re writing a story about a marriage breakdown. How would these different settings change the mood of the story?: The kitchen during the morning rush to get the kids to school A seating area outside a cafe close to where there’s a group of protestors shouting and waving placards A clifftop as your characters are participating in a walk for charity Create a mood word list for each of the following atmospheres: Spooky Tense Despairing Excited Joyful Find a scene in a novel (yours, or one you’re reading) where there’s more telling than there is showing. Re-write the scene in a way that conveys a mood without using the actual word. Describe a house and garden in three separate scenes, creating a different atmosphere in each.

Thursday, November 21, 2019

A Broadening Understanding of Islam Essay Example | Topics and Well Written Essays - 1000 words

A Broadening Understanding of Islam - Essay Example In the bestselling The Kite Runner by Khaled Hosseini, there is a gut-wrenching scene about a woman being stoned to death because she had not conducted herself according to Islamic law. Another bestseller entitled Reading Lolita in Tehran chronicles a women’s book club that must meet clandestinely to read Western books that have been outlawed by the Islamic fundamentalists in power at the time. Texts such as these lead us to believe that Islam is an antiquated and oppressive religion that is forced upon people by their governments. If people do willingly participate in Islamic rituals, media sources often jump to the conclusion that they have been brainwashed to do so. Yet Tyson’s article tells an entirely different story about Muslims in Turkmenistan who risked persecution at the hands of the Soviet government to worship at sacred shrines. Thus the article very much helps to balance out the often one-sided depiction of theocratic states that force fundamentalist Islam onto its powerless subjects. Not only did the article expand my perspective as to the different contexts in which Muslims have practiced their faith, David Tyson also broadened my idea of how Muslims worship. While mosques, prayer rugs and religious observances such as Ramadan are very much part of the image depicted by the media, I was not aware that pilgrimages had so much religious significance. Tyson details the many holy sites that are significant to Turkmens and shows how they played such an important role in preserving Islam in the face of the Soviet Union that sought to eradicate it from their empire.

Wednesday, November 20, 2019

Reflection paper Essay Example | Topics and Well Written Essays - 500 words - 37

Reflection paper - Essay Example It is important for me to know who I am and to acknowledge my identity. It also helps me to determine my strengths and weaknesses. This was the most interesting yet most difficult lesson to let sink in. Though I know that self-concept is an essential part of life, it is hard to look at your own strengths and weaknesses. I know now what some of those are and the areas that are my weaknesses are those that I can work on and learn from. It is not as simple as looking at yourself in the mirror but more like looking at yourself under a microscope and sometimes what you see is difficult. That is also where I had several â€Å"aha† moments. It sounds narcissistic to only acknowledge what I learned about myself but it is difficult to build on anything else in communication without acknowledging my own strengths and weaknesses in life. The HURIER method was also a great thing to learn because it helped me learn more about listening. Sometimes I find myself busy and thinking about other things that I have to do that I sometimes may drift off and think about other things when I am in the middle of a conversation or even in class. I may be hearing someone else but I am not listening. This lesson helped me to realize I need to stop what I am doing and listen or the translation of what I hear can be completely different than the message I was supposed to be hearing. I know that I need to go through the steps of hearing, understanding, remembering, interpreting, evaluating and responding, hence the acronym. In any conversation or giving an answer in class, I have to actually hear and process the message in order to give an appropriate response to what it is I have heard. I think it is a tool that I use without thinking about it but actually seeing it in a logical organizational form makes it easier to remind myself that I need to really think things through before responding. The elements that make me a bad

Sunday, November 17, 2019

Uses of Recycled Water in Horticulture Essay Example for Free

Uses of Recycled Water in Horticulture Essay There are numerous reasons of recycling, including cost saving, extended landfill span, resource conservation, energy conservation, economic development, pollution prevention and reduction in greenhouse gas emissions. In recent years environmental benefits of recycling have become a major component of waste management programme. What is recycled water? Water recycling is a generic term for water reclamation and reuse, where the resulting water is referred to as recycled water. This term will be used throughout this document, but you might also   find a number of other terms used in the water industry. These include: †¢ Water reclamation †¢ Water recycling †¢ Water reuse †¢ Wastewater †¢ Sewage effluent †¢ Reclaimed water †¢ Grey water Water recycling can include: †¢ Recycling of wastewater from previous uses. This generally means the reclamation of water from domestic sewage effluent or municipal wastewater. These waters may be recycled from bathroom and laundry effluents (grey water), from the entire domestic sewage stream (black   water) or from municipal wastewater Recycling of water from agricultural and industry wastewater. Recycled water can be either or both of the above waters. Stormwater, greywater, rainwater and treated effluent are all alternative water supplies that, when treated as required, are suitable for a range of purposes. This can include irrigating grazing land and crops, in horticulture, industrial processing, in residential dual pipe schemes, and to keep our public and recreational spaces green. On this website, recycled water generally refers to fully treated effluent from sewage treatment plants. Recycled water is a valuable resource. It contributes to conservation of drinking quality water, improves the reliability of our water supplies, frees up water for the environment or growth, and reduces the amount of treated effluent discharged into our bays and oceans. What can recycled water be used for? Recycled water can be used for just about anything, as long as it is treated to a level to make it fit for the intended purpose, from a health and environmental perspective (Figure 3) . However, the cost of treatment may make reclamation uneconomical for some uses. Australia now has more than 580 different recycled water schemes operating, which use approximately 167 GL/year. The bulk of these schemes involve: †¢ Urban and municipal environments †¢ Households, golf courses and recreational parks. †¢ Industry †¢ Washing and cooling in power stations and mills. †¢ Agriculture †¢ Horticulture, forestry, pasture, flowers, viticulture and sugar cane. Other possible uses include: †¢ Fire fighting †¢ Groundwater recharge †¢ Municipal landscapes †¢ ‘Dual pipe’ urban uses †¢ Environmental flows and wetlands It is now also possible for advanced treatment technology to produce safe drinking (potable) water. In several countries wastewater is recycled for potable reuse via groundwater injection (e. g. Factory 21, Orange County, California, USA) or where it is added directly to surface   reservoirs (e. g. NeWater, Singapore). Such planned indirect or direct potable reuse is not currently practiced in Australia, although it is being considered by some councils with severe water shortages. Recycled water is already being used in a wide range of applications, including the irrigation of agriculture, parklands and golf courses. What is horticulture? Horticulture is the art, industry and science of plant cultivation. Horticulturists work and conduct research in the disciplines of plant propagation and cultivation, crop production, plant breeding and genetic engineering, plant biochemistry, and plant physiology. The work particularly involves fruits, berries, nuts, vegetables, flowers, trees, shrubs, and turf. Horticulturists work to improve crop yield, quality, nutritional value, and resistance to insects, diseases, and environmental stresses. Etymology The word horticulture is a 17th century English adaptation of the Latin: hortus (garden) + cultura (culture)), it is the culture or growing of garden plants. Horticulture as classically defined is the subdivision of agriculture dealing in gardening: in contrast to agronomy which deals with field crops and the production of grains and forage, and forestry which deals with forest trees and products related to them. How is recycled water defined? Recycled water is defined as water that has been treated to a fit for purpose standard for a specific application.

Friday, November 15, 2019

Government Essay -- essays research papers

Governments Today Should governments today play a greater role in the operation of their economies? In a perfect world everyone would have a job, and would have all which they need to live, however, this is not always the case. Poorer countries may not have the necessary productivity to sustain their economies, working conditions may be awful, or sometimes people may not even have the right to own and operate their own business. This situation is probably caused from too much government intervention. On the other hand, if there is too little government intervention the workers rights could be exploited in order for the industry owners to make more profit. In order for a nation’s economy to be successful, that nation must have high productivity, rights for all of its population, and a high standard of living. This can be achieved through some government regulation and the successful use of some points of the market economy system. Some countries that have, or had, a failing economy used centrall y planned economic ideologies. The Soviet Union is a good example of a country that has used centrally planned economic ideas and that has had their economy fail. The failure of the Soviet Union’s economy was the effect of no substantial change in the way the economy was run in over 60 years. In 1928, Stalin wanted to improve the country’s economy by increasing its industrialization. In order for increased industrialization, an increase of productivity was in need. The first five-year plan Stalin implemented drastically increased the USSR’s production of steel, electric power, machinery, and new industries. However, peasants, who were once farmers and now worked in factories, were frustrated since they were not prepared for their new way of life. These peasants were forced to work in the factories since new machinery had replaced them on the farms were they once worked. However, the new machinery helped to increase agricultural production since they were more ef ficient and effective. The larger collective farms that could afford the modern machinery were urged to act against the kulaks (rich peasant farmers). The kulaks refused to sell their excess grain were forced to hand over their land to the government. Most of them burned their crops, killed their livestock, and destroyed the machinery in attempts to defy the government. The kulaks caused famine to sweep over th... ... conditions, because factory owners did not regard the safety of their workers, many workers often died because of their jobs, or suffered great injuries that would not able them to work at all. The Soviet Unions’ economic collapse and the Industrial Revolution workers working conditions tell us that a mixed economic system is the best choice for today’s countries. This is because with out government control in the economy workers can be exploited with out any regard for their safety or well being. However, in an economy, where there is total government control the workers may lose initiative to work and the economy may collapse. The best examples of a stable economy that protects the rights of the people are the United States and Canada. This is because their productivity increases as their population increases, and the workers do not face horrible working conditions. Also, Canada and the United States enjoy a high standard of living, and people can enjoy the freed om to operate their own private businesses. Simply government control is necessary to protect the rights of people, but some points of the capitalist economic system are necessary to take care of the consumer’s needs.

Tuesday, November 12, 2019

Business Economics – Regression Analysis

Effect of Ratio Profitability: Return on Asset (ROA) and Return of Equity (ROE) to Stock Price of PT Bank Central Asia (BCA) Tbk. Ratio profitability, Return on Asset (ROA) and Return of Equity (ROE), of a firm is used as one of parameters for investor to decide whether they want to invest or not. The following table consists of ROA and ROE as well as the stock price of PT Bank Central Asia (BCA) Tbk. , as one of the largest bank in Indonesia, from year of 2002 up to 2011. Table 1. ROA, ROE and stock price of PT Bank Central Asia Tbk. tahun 2002-2011 Year| Stock Price(Y)| ROA(X2)| ROE(X2)| 2002| 2500| 2. 17| 22. 08| 003| 3325| 2. 36| 24. 87| 2004| 2975| 3. 04| 32. 52| 2005| 3400| 3. 41| 32. 33| 2006| 5200| 3. 43| 33. 58| 2007| 7300| 1. 68| 16. 47| 2008| 5778| 3. 14| 33. 16| 2009| 5645| 3. 17| 32. 11| 2010| 4284| 3. 28| 31. 23| 2011| 3674| 2. 65| 24. 16| Using regression analysis we want to determine the relationship between ROA, ROE and stock price of PT BCA Tbk. In this case, ROA an d ROE are the independent or explanatory variable (X), while stock price is the dependent variable that we want to explain (Y). Regression Analysis SUMMARY OUTPUT| | | Regression Statistics| Multiple R| 0. 13028475| R Square| 0. 016974116| Adjusted R Square| -0. 63890422| Standard Error| 1710. 529517| Observations| 10| ANOVA| | | | | | | df| SS| MS| F| Significance F| Regression| 2| 353656. 3| 176828. 15| 0. 060435241| 0. 941840446| Residual| 7| 20481378. 6| 2925911. 229| | | Total| 9| 20835034. 9| | | | | Coefficients| Standard Error| t Stat| P-value| Lower 95%| Upper 95%| Lower 95. 0%| Upper 95. 0%| Intercept| 5361. 609293| 2796. 526605| 1. 917238793| 0. 096721961| -1251. 125335| 11974. 34392| -1251. 125335| 11974. 34392| X Variable 1| -142. 3275587| 3749. 125063| -0. 037962873| 0. 970777259| -9007. 599603| 8722. 944486| -9007. 599603| 8722. 944486| X Variable 2| -19. 7879081| 375. 1702777| -0. 051919867| 0. 960043105| -906. 6155278| 867. 6579462| -906. 6155278| 867. 6579462| From the summary output we can estimate the linear relationship between the stock price (Y) and ROA (X1), ROE (X2) in the form of equation below: Y= 5361. 6092 – 142. 3275 X1 – 19. 4788 X2 The result indicates that for each 1% decrease in ROA and ROE; the stock price decrease by IDR142. 3275 (the estimated coefficient of X1) and IDR19. 4788 (the estimated coefficient of X2) also, respectively. To understand how significant the independent variable can explain the dependent variable, we can observe from t-stat data.The critical value of t at the 0. 05 level of significance is 2. 365 (from table of the t distribution). The analysis result show that t-stat value below the critical value of t = 2. 365. It means that at the 5% level of significance, we accept there is no significant relationship between ROA, ROE and stock price. We need more variable better than just ROA and ROE to picture the movement of price stock. The two variables, ROA and ROE, are not enough to explain th e stock price of PT BCA Tbk. Now, we want to see how good is the model or how much the explanatory power of the model by looking at R2 data.R2 measures how much of the variation in the firm’s stock price is explained by the variation in its ROA and ROE. The analysis result shows that the value of R2 is 0. 016974116, extreme to 1. It means that none of the variation in stock price was explained by the variation in ROA and ROE. In conclusion, looking at the value of t-stat and R2, variable ROA and ROE is not enough to explain the movement of stock price PT BCA Tbk. We need to add more variables to get more description how the stock price change and how significant and sensitive the variables impact to stock price.

Sunday, November 10, 2019

What makes a good teacher

Teachers play a crucial role in the continues growth of society. The goal of every teacher is to pass his/her teachings to his/her students for their personal benefit. As a student I was assigned the task of analyzing and defining the differences of a teacher and a good one, comparing the virtues of a good teacher with many others things, and making clear what a good teacher is not. In order to understand what a good teacher is, first we need to analyze what is a teacher. A teacher is an individual who can be either male or female. A teacher is an adult who has mental ability. Teachers are individuals who have educated and prepared themselves such as going through a university degree, plus two years teachers college. Now, who is a great teacher? Being a good teacher does not ensure his or her to be a good one. Good teachers need to be wise people with enough experience and knowledge. Also, good teachers are patients and humorous with the main purpose that their teachings are easily understood by their students. Good teachers are sociable individuals who can interact with all their students in order to understand and respect their students` opinion. Good teachers could be compared with many things in this world. Good teachers are physiologists, as they are able to deduce their students’ problems. Good teachers are similar to parents given that they play a role model for students to become very successful in their future life. Good teachers are a great source of knowledge and experience. Good teachers are as coaches given that they encourage their students to achieve what they really want. In addition, good teachers can be considered as an encyclopedia because they have a broad knowledge, which they transmit to their students. By defining, what a good teacher is not, improve the understanding of a good teacher. Good teachers are not individuals who are only interested in making money because their commitment is to play an important role model for students. Good teachers are not magician; they cannot do miracles to incentive the students to study as the result depends on how eager the students have to meet their goals. In addition, good teachers are not robots because they also can get tired and have problems as students do. In conclusion, there are many differences between a teacher and a good one. However, the major task of a good teacher is to guide their students through the right path in order to make the students become successful in their future life. What Makes a Good Teacher What Makes a Good teacher? To teach or not to teach that is the question Teacher is not only a person, who should teach, it is a person who must lead the pupil on the way to the knowledge. Teacher shows the world and explain the laws of this world. He is often a tutor, a preceptor, a person that you respect. This profession is very hard and important. But, what makes a good teacher? There are many things which make a teacher great and they all can`t be defined. However i`ve always considered several of them essential.In my opinion a good teacher is someonewho first of all creates interest in studying,doesn`t underestimate the children,has equal expectations of siccess from everyone and last but not least likes his job. A good teavher always has a sense of purpose. He chooses very carefully the teaching programme and adjusts it to the needs of his students. Children always come first and that`s why the decision he makes are based on how they will affect them. He shares experience with other teachers and thus is always learning new things.It is very important for a teacher to be a good communicator. my mind, teacher is at first a man, a person and if he is a difficult person with inner problems, with bad character – he can’t be really good teacher because teacher works with people, not with machines. He should know how to socialize, how to help others. Good teacher must understand their pupils, their feelings. Teacher’s purpose is giving knowledge, but people don’t take knowledge easily, they want to convince themselves in necessity and importance of this information.Good teacher can make so that pupils let pass the studies throw their hearts. Most of all, it is very important for teacher to love his subject. His mood, opinion irrationally hands on his pupils. If person love something – his feelings, his example will be better than any words. So, what makes a good teacher? I think, a good teacher is a vocation, a gift of God bec ause sometimes a person have excellent qualities, wonderful character, loves his subject, but we can’t say that he is really good teacher. To be a good teacher is a talent and a miracle. What Makes a Good Teacher A person may be blessed with natural abilities, but through human nature, we desire personal connection and motivation. The movie Stand and Deliver told the story of a high school class that fell short of academic requirements. Jamie Escalante was a new, influential teacher who made an impact on inner city students by simply demonstrating interest and faith. Jamie showed attention to the students outside of the classroom and did not give them the opportunity to make excuses. Mr. Escalante cleverly manipulated his students into success with various techniques, a majority of which would help me thrive in math class.Angel was a student, first introduced as a trouble maker. As the audience realizes that there is more to Angel than his tough guy routine, so does Mr. Escalante. He is a compassionate grandson, taking care of his sickly grandmother. Angel showed up to Mr. Escalante’s house on Christmas Eve with his grandma, and although it was an act of resentment, they were welcomed in for dinner. Personally, when I was younger my grandpa was very sick; I would spend nights in the hospital with him and my family unable to complete homework assignments which ultimately set me behind in classes.However, like Mr. Escalante, my teachers understood that my life did not always revolve around the classroom. I had other responsibilities and worries on my mind. However, Mr. Escalante also did not allow his students to let their worried minds become excuses for their lack of success or sloppy work ethic. All Mr. Escalante asked of his students was ‘ganas’ or the desire to learn. He held them to a higher standard than they ever had been before which motivates me well because it gives me something to prove.I want to join the Navy after high school and a friend of my sister’s said that I do not have the desire for it. After I heard that, I became more encouraged than ever. Also no excuses were tolerated in his classroom which I believe is a fantastic tac tic. Students know exactly how to manipulate teachers, whether there is a sincere justification for something or just an excuse. When Angel is late to class, Mr. Escalante kicks him out, since his tardiness shows that Angel does not see the value in learning.Later, Angel again comes into class tardy, this time after being with his grandmother in the hospital. Although Angel’s excuse is genuine, Mr. Escalante does not accept it and asks Angel to leave. It is this attitude that inspires the students to attend class regularly and on time. In life, excuses get you nowhere except back where you started. Teachers who do not accept excuses are the ones who care about you enough to get you ready for the real world. Mr. Escalante was very successful. He started with a class of students who did not care about grades or math at all.However, through his tactics, within a few years, those same students passed the advanced placement calculus final. Mr. Brechlin, I will do better in math an d school in general if I am forced to be all I can be just as Jamie’s students were. I am a slacker†¦ and need to be pushed! Like Angel I do have personal and family issues and need help and guidance at times. However, as Mr. Escalante put it, when I’m getting hired for a job they will not want to hear my problems. In the real world, there are no such things as excuses, only my work ethic and ability to succeed.

Friday, November 8, 2019

Nuclear Arms Race essays

Nuclear Arms Race essays In order to maintain peace and stability in the world, there must be a balance of power between countries. The Nuclear Arms Race was started because there wasn't a balance of power after World War II. The U.S. was the only country at that time which possessed nuclear weapons. Russia, fearing a United States domination of world power, developed a nuclear bomb of its own. Thus started the Arms Race, in which both countries attempted to gain the upper hand in terms of the number of nuclear warheads each possessed. However, the Arms Race ended when several treaties in arms reduction were passed. I believe that in the end, the United States and the Soviet Union realized that one country would eventually win, and the balance of power would again be shifted. Fearing a nuclear war, arms negotiations began in an attempt to lessen the tension. This is evident in the fact that treaties between the two countries were signed, agreeing on the limitation and testing of nuclear arms. It is also illustrated in the Cuban Missile Crisis, where Russia agreed to withdraw the missiles placed in Cuba, fearing U.S. retaliation. In order to better understand the Arms Race, a brief history must be given. The Arms Race probably began in August of 1949, when Russia detonated its own nuclear weapon, thus ending the U.S. monopoly. In response, President Truman ordered the development of the hydrogen bomb in January of 1950. However, the Soviet Union made the first H-bomb in August of 1953. Then, the race escalated when the Inter-Continental Ballistic Missile was developed in the summer of 1957, again by the Soviets. A serious crisis arose in 1962, when the Soviets placed ballistic missiles in Cuba, their new ally. The missiles were withdrawn when the U.S. threatened nuclear retaliation. In return, President Kennedy's promised not to invade Cuba. The world had never come closer to a nuclear war. Negotiations, beginning with the establishme...

Tuesday, November 5, 2019

Heat Capacity Worked Example Problem

Heat Capacity Worked Example Problem   Heat capacity is the amount of heat energy required to change the temperature of a substance. This example problem demonstrates how to calculate heat capacity. Problem: Heat Capacity of Water from Freezing to Boiling Point What is the heat in joules required to raise the temperature of 25 grams of water from 0 C to 100 C? What is the heat in calories? Useful information: specific heat of water 4.18 J/g ·Ã‚ °CSolution: Part I Use the formula q mcΔTwhereq heat energym massc specific heatΔT change in temperatureq (25 g)x(4.18 J/g ·Ã‚ °C)[(100 C - 0 C)]q (25 g)x(4.18 J/g ·Ã‚ °C)x(100 C)q 10450 JPart II4.18 J 1 caloriex calories 10450 J x (1 cal/4.18 J)x calories 10450/4.18 caloriesx calories 2500 caloriesAnswer:10450 J or 2500 calories of heat energy are required to raise the temperature of 25 grams of water from 0 C to 100 C. Tips for Success The most common mistake people make with this calculation is using incorrect units. Make certain temperatures are in Celsius. Convert kilograms to grams.Be mindful of significant figures, particularly when working problems for homework or an exam.

Sunday, November 3, 2019

Learning Styles Coursework Example | Topics and Well Written Essays - 1000 words

Learning Styles - Coursework Example However learning styles have been criticized stating that in achieving goals and learner’s motivation, teaching or learning based on learning styles have very little impact and does not play a significant role and might typecast the learners (Coffield et al, 2004). Using the Learning style inventory assessment questionnaire (Honey and Mumford, 1992), I learnt that my preferred way of learning or learning style is reflector. In the present paper a critical reflection of the identified learning style in the context of three personal development goals is analysed along with the critical evaluation of the internal and external factors contributing to the attainment of my personal development goals and at the end learning developmental plan is giving on SMART principles. Critical Analysis of Reflector Learning Style Kolb (1984, p.38) who developed learning cycle defined â€Å"Learning as the process whereby knowledge is created through the transformation of experience†. Base d on Kolb’s (1984) learning cycle, Honey and Mumford (1992) developed the ‘learning styles inventory’, and according to Honey and Mumford (1992, p.1) â€Å"the term learning styles is used as a description of the attitudes and behaviours which determine an individual’s preferred way of learning† and no learning style is superior to that of another. The below figure gives the four learning styles developed by Honey and Mumford (1992), where they said that people either learn through teaching or experience and explained four learning stages and suggested that a person may start learning at any of the stages illustrated below. Figure 1: Honey and Mumford: Typology of Learners (Honey and Mumford, 1992) Honey and Mumford (1992), state that a reflector collects information and evaluates it before coming to a conclusion. Reflectors until and unless are sure about the conclusion does not give their opinion or judgement as they are very cautious and thoughtf ul. Reflectors favour intellectual activities, situations that are passive, for participative activity need substantial briefing beforehand, preparation time, thorough research, learning situations that are structured and do not favour pressure or time limits. They do not cope up well with lack of adequate information and well laid instructions, spontaneous thinking and time bound activities (UMIST, 2003 and University of Southampton, 2003). My main personal goal is to become a Diplomat and a good martial arts teacher because I am interested in diplomatic service and learning martial arts from a long time and want to impart the knowledge to others and popularize the art form, other than that I want to score good grades in the Business Management course, the below analysis examines whether my learning style helps in achieving these goals. A critical reflection of the identified learning style-Reflector in the context of three personal development goals. Basing on the principles of C- SMART goal setting that stands for the goals that are Challenging, Specific, Measurable, Achievable, Realistic and Timely (Life Rocks, 2007; ECU, 2010; University of Ballarat, 2012) I have set my goals as follows. I want to become a Diplomat and a Capoeira martial arts teacher – an Afro-Brazilian martial art combined with dance but before that I want to secure good grades in the Business management course ending May 2014. I want to secure A+ grade in the course, meanwhile work part time as a Capoeira martia

Friday, November 1, 2019

Art Essay Example | Topics and Well Written Essays - 750 words - 1

Art - Essay Example He was also heavily influenced by the Post-Impressionists Gauguin and Van Gogh. Picasso was a Spanish artist known as the founder of Cubism. Unlike Matisse, Picasso’s paintings of women are grotesquely distorted. He portrays the woman with darkness and vulgarity. In the early years of the twentieth century, Picasso embarked on a series of paintings using blue palette and melancholy themes. After his Blue Period, came his Rose Period which emphasized a warmer palette and more cheerful themes. Picasso’s works were influenced by Matisse’s works especially with his still life paintings. However, Picasso focused more on form and innovation while Matisse focused more on color and was less abstract. Picasso uses form with symmetry at different angels, geometrics and inspiration from household tools. On the other hand, Matisse always preferred bright colors even in his landscapes. His colors changes from light to dark but its mixtures make it even more creative. Matisse does not have much attention to detail but he adheres to reality unlike Picasso who would usually distort the images of his subjects. The art works of both artists were influenced by each other, more so when they developed a friendly rivalry. One of the more famous works of Picasso is the â€Å"Les Demoiselles d’Avignon† which is an example of his neo-cubism, modernism, and impressionism. This painting shows women who are immensely distorted. Geometric shapes are used instead of curves to portray the bodies of the women. The painting uses dark colors such as brown, black and blue which makes the theme gloomy. Matisse’s â€Å"Joy of Life† on the other hand depicts women more naturally by showing the right curves and proportions. The mood of Matisse’s painting is livelier because of the colors that he used specifically, red, green and yellow. Although both paintings show a group of women, one can clearly see the difference in how they are portrayed b y both artists. Matisse’s â€Å"Joy of Life†, 1905-1906 vs. Picasso’s â€Å"Les Demoiselles d’Avignon†, 1907 Picasso’s â€Å"Vase, bowl & lemon†, 1907 vs. Matisse’s â€Å"Blue Pot and Lemon† , 1897 The paintings above are examples of still life paintings of Picasso and Matisse. Unlike other Matisse’s paintings, the colors are quite dull. In contrast, Picasso’s emphasizes the shapes of the objects by using black outlines on the figures. His colors are darker as compared to those of Matisse’s. In Matisse’s painting, the objects seem to blend with its background because of its complimentary colors while in Picasso’s painting, the dark blue and gray background shows a sharp contrast between the colors of the lemon and the vase. Picasso’s â€Å"Acrobat† 1930 vs. Matisse’s â€Å"Acrobats† 1952 The above paintings of both Picasso and Matisse show clearly how they in fluenced each other. The paintings show the different interpretations of the two artists on one subject. Again, we can see Matisse’s love for colors by painting the human body blue in a beige background. On the other hand, Picasso simply used black and white. The two paintings though, both show a distortion of the human body. Works Cited Carver, Reg. Matisse or Picasso. 11 February 2011. Web. 3 May 2011. http://www.findmyowncurrent.com/2011/02/11/matisse-or-picasso/ Edward and Betty Marcus Foundation. Matisse & Picasso. 2001. Web. 3 May 2011